Three configurations (Sport, Multi-Sport and Tiller) bring KingFisher’s all-welded aluminum construction to Great Lakes and big-lake multi-species anglers. Now available at select dealers and to order for summer delivery.
KingFisher Boats introduced the 19 APX (pronounced “Apex”), a new 19-foot platform for anglers who fish big lakes. The APX comes in three configurations: Sport, Multi-Sport and Tiller. All three share the same heavy-gauge, all-welded aluminum hull.
Big lakes change fast. The wind comes up, the waves stack, and a calm morning can turn rough by noon. The 19 APX was built for that water. It has an 8-foot beam, 2′ 5″ sides, a variable 18-degree deadrise and KingFisher’s exclusive Pre-Flex® heavy-gauge hull technology. The bottom is 0.190″ aluminum and the sides are 0.125″, welded throughout, with no rivets. A full-length delta keel, reverse chines and lifting strakes keep the ride stable and dry when conditions build.
The APX Bow puts more of that length to work. It opens up the forward deck to give anglers a bigger casting platform and more room to move.
“The Great Lakes and the big lakes around them are some of the best multi-species water in North America. They’re also some of the toughest on a boat,” said Baxter Bolton, President of KingFisher Boats. “For too long, anglers here have had to choose between a boat that fishes well and one that can handle a rough crossing. We’ve been building heavy-gauge welded boats in Canada since 1959, and we know they don’t have to choose. The 19 APX takes everything we know about rough water and builds it into a 19-foot boat sized for these lakes. That’s a big opportunity for us and for our dealers, and we think anglers are going to feel the difference the first time the wind picks up.”
Three ways to fish the 19 APX
19 APX Sport

The Sport is built for the serious multi-species angler. It has a dual console layout with a five-piece bonded windshield. Storage includes a bow-deck locker for 7′ 6″ rods, underfloor storage for 8′ rods and lockable port-side rod storage. There is a 24-gallon aerated livewell, five removable pedestal bases and rear folding jump seats. It is rated up to 200 hp.
19 APX Multi-Sport
First cast to last swim.
The Multi-Sport is the boat that goes from yours to ours. It has a bowrider layout, but it does a lot more than a bowrider. Cushioned bow seating is standard on every boat, providing comfortable seating for the whole crew.Convert the deck to a table and you’re set for lunch on the water. Pull the base cushions and the bow becomes a casting platform. Oversized rear convertible benches add even more room. The Multi-Sport keeps the full fishing package: a 24-gallon livewell, 8′ underfloor rod storage and lockable rod storage. It’s also ski pylon ready, so it goes from fishing to cruising to watersports in the same day. It is rated up to 200 hp.
19 APX Tiller

The Tiller opens up the cockpit for anglers who want to work every side of the boat. Dual center rod storage holds 8′ rods below and 7′ 6″ rods above. It has KingDeck on the bow, gunnels and accents, plus four removable pedestal bases and a dual battery kit. It is built on the same heavy-gauge Pre-Flex® hull as the rest of the APX lineup and rated up to 90 hp.
Every 19 APX comes with a limited transferable lifetime hull warranty and a matched tandem-axle trailer. Each configuration is offered in Base, Select or Limited trim, depending on the configuration.
Availability
Build yours now. The 19 APX is available to order through authorized KingFisher Boats dealers for summer delivery. First-year production is limited. To build yours and find a dealer, visit KingFisherBoats.com.
19 APX specifications
|
Length |
5.79 m / 19′ 0″ |
|
Beam |
2.44 m / 8′ |
|
Height of sides |
73 cm / 2′ 5″ |
|
Bottom width |
208 cm / 6′ 10″ |
|
Deadrise |
Variable 18° |
|
Hull thickness |
Bottom 4.82 mm / 0.190″ · Sides 3.2 mm / 0.125″ |
|
Fuel capacity |
162 L / 43 USG |
|
Livewell capacity |
91 L / 24 USG |
|
Transom height |
64 cm / 25″ |
|
Maximum HP |
Sport and Multi-Sport: 200 hp · Tiller: 90 hp |
|
Approx. dry weight |
Sport: 2182 lbs, Multi-Sport: 2453 lbs, Tiller: 2133 lbs |
About KingFisher Boats
KingFisher Boats is the fastest-growing brand of all-welded heavy-gauge aluminum fishing and adventure boats in North America, proudly designed and hand-built at its Center of Excellence in Vernon, British Columbia. A family-owned company that began in 1959, KingFisher has put more than 133,000 boats on the water for anglers and families across the continent. Its 24 models across four series: Offshore, Coastal, Sport and Multi-Species, are built on the company’s proprietary Pre-Flex® hull technology, certified to meet and exceed Canada’s small vessel construction standards, and backed by a transferable lifetime hull warranty. KingFisher is the flagship brand of the Bolton family’s Bryton Marine Group, whose recreational, commercial and custom boat builders across Western North America include Renaissance Marine Group, BRIX Marine, EagleCraft Boats and All-American Marine. Recognized by Deloitte as one of Canada’s Best Managed Companies with Platinum Status, KingFisher sets the benchmark for craftsmanship and innovation in the marine industry. Learn more at https://kingfisherboats.com/
Keyword : 19 APX, 19 APX Multi-Sport, 19 APX Sport, 19 APX Tiller, kingfisher, KingFisher 19 APX, KingFisher 19 APX Multi-Sport, KingFisher 19 APX Sport, KingFisher 19 APX Tiller 19 APX, 19 APX Multi-Sport, 19 APX Sport, 19 APX Tiller, kingfisher, KingFisher 19 APX, KingFisher 19 APX Multi-Sport, KingFisher 19 APX Sport, KingFisher 19 APX Tiller





